A Guide for Jewelers on the Most Important Beading Findings


In this informative jewellery guide, you’ll find information about beading findings. Beading may be an intimidating hobby for beginners because of all the terminology involved. Study the fundamental words and components of ordinary language that you will require.

Your next beading design requires that you select the appropriate beading wire, clasps, headpins, and other components.

The selection of the appropriate beading findings is equally as important as the selection of the appropriate beading wire when you are designing jewellery. Do you intend for the completed product to have an air of high-end professionalism, or do you want it to be accessible to a wider audience?

 Have you made a decision on the crimp type? What do you think about crimp covers? Before you design your next piece of jewellery, make sure to go through our enlightening Q&A section, and then keep reading down to discover the crucial beading findings that are the most in demand currently.

Popular Stringing Material

Beadalon and Soft Flex are the most common choices when it comes to stringing your beaded jewellery; however, there are many other options available.

These beading wires come in a variety of strengths and degrees of flexibility to choose from. If you are able to differentiate between the many possibilities, selecting the appropriate material for your beading project will be much simpler.

The Terminology of Beading Wire

Wires made of stainless steel covered in nylon are the material, and the wires are braided or woven together.

Strand Count: a lower strand count corresponds to less flexibility, whereas a greater strand count corresponds to excellent flexibility.

The thinner the diameter, the lighter the finds; the thicker the diameter, the heavier the components. Diameters

Test Strength: the maximum allowable load for that specific type of beaded wire

How to Select the Appropriate Beading Wire

Before beginning work on a brand new beaded jewellery design, there are a few things you need to ask yourself on the type of beading wire you should use.

 These questions are designed to get you to think not just about the process of designing your next beaded masterpiece as well as the completed product, but also about how long it will last in the long run.

Whether you are a beginner or an expert beader, the answers to these questions can have a significant impact on the final product you create.

  • Will the jewellery be worn on a regular basis or just on special occasions?

Consider using wires with a higher strand count if you want your beaded jewellery to be strong and endure a long time. Seven-strand wires are cheap and work well in designs that require some degree of stiffness or for pieces that are worn seldom. These can better endure the wear and tear that comes from day-to-day use than a 7-strand can.

  • What kinds of findings do you plan to use in the jewellery that you design?

Stringing wire should have either 19 or 49 strands if it is to be used in high-end designs that incorporate gold-filled or sterling silver components. In addition, 7-strand wire is prone to kinking, which might modify your design in an unpleasant way if it ever gets snagged.

These are more durable and seem more professional when hung, whereas 7-strand wire is more likely to kink. The draped appearance created by the 49-strand stringing wires is unrivalled in the industry.

  • Do you want a wire that is flexible or one that is stiff?

Necklaces with seven strands are ideal for wearing as a choker or collar necklace. These are similar to metal wire in that they keep their form. If it is for a bracelet, which is an item that is frequently subjected to wear and tear, flexibility is crucial so that the bracelet does not break off with daily usage; in this situation, 19 or 49 strand wire would be the ideal option to use.

  • What are the sizes of the holes on the inside of the beads?

When selecting the jewellery stringing wire, it is essential to take into consideration the diameter of the bead hole. The diameter of the wire cannot go any larger than the size of the hole in the tiniest bead.

The component will be more durable if it has a thicker wire, but you also want it to have the most precise fit possible. Bead holes will eventually wear down the stringing wire, particularly when the beads are not properly secured on the wire.

  • What kind of weight can we expect the individual parts to have?

If you incorporate heavier things in your creations, you will need to make adjustments to your beaded designs to accommodate for the weight of those objects.

To begin, you will need to check the test strength of the stringing wire, which may be found on the label or online. If you cannot locate the label, you can look up the information online. Also, do you like the completed piece to flow loosely around your neck or fit snugly around your neck like a choker?

A Different Kind of Stringing Material

There are many more options available than beading wire. You may alternatively use a stringing chain or even satin or leather cords; these options are particularly helpful in situations in which the individual has a known sensitivity to metals. Check out the specifics of each variety that are listed down below for additional information.

Cords made of Leather and Satin

Satin or leather cords are an excellent choice for individuals who are allergic to metal since they provide an alternative. These have a somewhat different finish than others; they have a clasp as well as an end cap. Because they are often on the more substantial side, you will need to compare the diameter of the cord to the size of the hole in the bead’s inner diameter.

A Chain of Footage

A stringing cable chain is a stunning option that may be used instead of wire and rope. This dainty chain is ideal for using with charms and beads that are quite small and lightweight.

A dab of glue and little crimping at the ends should finish off the item. Your jewellery creations will benefit greatly from the addition of gold-filled findings if you use this technique.

Beading Jump Rings (also Known As)

Jump rings are one of the most common components that can be found on the workbench of every jeweller. Beading findings like as jump rings are very necessary. Beading designs may utilise these little components for nearly every type of cold connection imaginable.

 It is possible to connect closures and clasps to them, as well as hang charms and pendants from stringing wire, chain, and earring findings with their help. Beading designs can immediately utilise open jump rings; however, you will need to evaluate the varied tempers of the wire before doing so.

Jump rings with a soft tempering

A bendable and malleable jump ring. When pulled or snagged, they are simple to disassemble, but when it comes to adaptability, nothing can compare. Before you use the rings, we recommend that you work-harden them first.

 Before using them, soft jump rings can be made more durable by first being hammered with a nylon or rawhide hammer or by being tumbled in a tumbler.

Jump rings with a hardened and tempered snap

Tempered wire is used in the construction of these rigid jump rings. These do not require any kind of work hardening because they are already strong and dependable when used in beading patterns. They are held in place by a secure snapping mechanism. The video that follows will enlighten you further on these hard snap jump rings.

It is essential to correctly open and close jump rings in order to prevent warping and damage, as seen in the video. By doing this one easy action, you can ensure that your jewellery will retain its stunning appearance for a longer period of time.

Crimps and Covers Are Beading Essentials

Utilize crimps in order to secure the components of your beading project. When working with stringing wire, crimps are an absolute need; nevertheless, which do you favour more? What about tubes? Check out the distinctions between the crimps that are shown below if you are unclear what to do.

 Crimp covers aren’t required in any way, shape, or form, in contrast to crimps. We decided to offer these for all of the beaders out there who are interested in giving their jewellery designs a more polished and expert appearance.

Rounds and tubes with crimps

Crimps are an essential discovery for those who do beadwork. In addition to helping you finish your project, they ensure that all of your components remain in place. Crimp tubes are more user-friendly, while round crimps are less expensive. Round crimps come in a variety of sizes.

 They have a larger opening, which allows them to better grip the stringing wire. In addition, they are stronger than round crimps, which have a tendency to break. It is essential that you choose a round or tube crimp that is broad enough for the stringing wire to thread through it twice, but that is not any bigger than that.

 Before you crimp it, the fit should be snug; otherwise, the crimp will collapse and it will seem unprofessional. If the fit is too large, the crimp will collapse as well.

In order to use, thread the wire through the crimp, make a loop with it, and then run it back through the crimp in the other way before crimping it.


Leave a Reply

Your email address will not be published.